International conferences

F. Kelen, T. Aydogmus, M. Gavgali, B. Dikici, TiNi ile takviye edilmiş AZ91D matrisli kompozitlerin korozyon davranışı, in: XVth Int. Corros. Symp., 26-28 September, Hatay, TURKEY, 2018: p. 20.

M. Topuz, B. Dİkİcİ, M. Gavgalı, H. Yilmazer, International congress on 3d printing technologies and digital industry 2018 19-21, in: 3rd Int. Congr. 3D Print. Technol. Digit. Ind., 19-21 April, Antalya, TURKEY, 2018: pp. 135–138. http://3dprintturkey.org/assets/uploads/2018Abstractbook.pdf.

H. Yilmazer, F. Toptan, M. Niinomi, B. Dikici, A.C. Alves, I.L. Caha, M. Isik, H. Koklu, Z. Horita, Tribocorrosion behavior of nanostructured biomedical Co-Cr-Mo alloys through high pressure torsion, in: MS&T18, 14-18 October, Ohio, USA, 2018: p. 100.

H. Yilmazer, B. Dikici, M. Niinomi, M. Nakai, Electrochemical impedance spectroscopy (EIS) evaluation of biomedical nanostructured β-type titanium alloys, in: 1st Int. Symp. Light Alloy. Compos. Mater., 1st International Symposium on Light Alloys and Composite Materials (ISLAC’18), 2018: pp. 388–389.

M. Topuz, B. Dİkİcİ, S.G. Koç, M. Nakai, N. Mitsuo, Bioactive surface modification with bioglass/hydroxyapatite of biomedical titanium alloys and their beneficial effect on corrosion resistance, in: 1st Int. Symp. Light Alloy. Compos. Mater., c, 2018: pp. 317–318. http://www.uhaks18.com/uhaks.pdf.

F. Akpınar, F. Kalan, Ç. Şenocak, B. Dikici, K.V. Ezirmik, Eloksal işlemi uygulanan alüminyum alaşımlarının asidik ve alkali ortamlarda korozyon özelliklerinin incelenmesi, in: XVth Int. Corros. Symp., 26-28 September, Hatay, TURKEY, 2018: p. 84.

F. Kelen, T. Aydoğmuş, M. Gavgali, B. Dikici, Mg/NiTi metal matrisli kompozitlerin korozyon duyarlılıkları, in: XVth Int. Corros. Symp., 26-28 September, Hatay, TURKEY, 2018: p. 19.

F. Songur, E. Arslan, B. Dikici, Characterization of PEO-deposited TiO2/HA nanocomposite coatings, in: 19th Int. Metall. Mater. Congr. (IMMC 2018), 25-27 October, Istanbul, TURKEY, 2018: pp. 761–764.

B. Tozkoparan, B. Dikici, F. Bedir, M. Topuz, M. Gavgali, Al‒Cu metal matrisli kompozitlerin korozyon davranışı üzerine B4C partikül hacim oranı ve yaşlandırma işleminin birleşik etkisi, in: 2 . Uluslararasi Savun. Sanayi̇ Sempozyumu (IDEFIS 2017), 06-08 April Kirikkale, TURKEY, 2017: pp. 237–244.

H. Yilmazer, B. Dikici, Development of high value alloys without critical raw materials through high entropy alloys, in: 3rd Iron Steel Symp., 03-05 April, Karabuk, TURKEY, 2017: p. 238.

H. Yilmazer, B. Dikici, M. Niinomi, M. Isik, M. Nakai, Nano-grained Co-Cr-Mo alloys and corrosion through severe plastic deformation, in: 20th Int. Conf. Mater. Form. (ESAFORM 2017), 26-28 April, Dublin, IRELAND, 2017: pp. 1–2.

A. Gökduman, H. Yilmazer, C. Göde, B. Dikici, J. Dvorak, V. Sklenicka, G. Asli, B. Adem, G. Halil, High performance copper and copper alloys fabricated by severe plastic deformation, in: 3rd Iron Steel Symp., 03-05 April, Karabuk, TURKEY, 2017: pp. 75–78.

H. Köklü, H. Yılmazer, C. Göde, B. Dikici, Y. Todaka, H. Göker, High pressure torsion applications on dilute copper alloys, in: 3rd Iron Steel Symp., 03-05 April, Karabuk, TURKEY, 2017: pp. 79–82.

M. Topuz, S.G. Koç, B. Dikici, M. Niinomi, M. Nakai, H. Yilmazer, The synthesis and determination of mechanical properties of metal oxide-reinforced hydroxyapatite based ceramic coatings, in: 2nd Int. Conf. Mater. Sci. Technol. Cappadocia (IMSTEC 2017), 11-13 October, Nevsehir, TURKEY, 2017: pp. 378–378.

B. Dikici, M. Niinomi, M. Topuz, H. Yilmazer, M. Nakai, Comparison of corrosion behaviors of β-type Ti29Nb13Ta4.6Zr alloys with α and α+β type titanium alloys, in: 2nd Int. Conf. Adv. Eng. Technol. (ICADET 2017), 21-23 September, Bayburt, TURKEY, 2017: pp. 1512–1512.

B. Dikici, F. Bedir, M. Gavgali, The effect of corrosion on the microstructure of the Al-5Cu matrix composites reinforced with TiC particles, in: Eur. Congr. Exhib. Adv. Mater. Process. (EUROMAT 2017), 17-22 September, Thessaloniki, GREECE, 2017: pp. B10-O-THU-PM1.

B. Dikici, S.G. Koc, M. Topuz, M. Niinomi, M. Nakai, Silver/hydroxyapatite hybrid coatings on Ti-6Al-4V surfaces by sol-gel method, in: Eur. Congr. Exhib. Adv. Mater. Process. (EUROMAT 2017), 17-22 September, Thessaloniki, GREECE, 2017: pp. C1-II-P-THU-P2-20.

M. Topuz, B. Dikici, S.G. (Koc), M. Niinomi, M. Nakai, The effect of hydroxyapatite/titania bioactive coatings on the corrosion resistance of CP Ti grade 2, in: 22nd Int. Biomed. Sci. Technol. Symp., 12-14 May, Ankara, TURKEY, 2017: p. O-44.

B. Dikici, M. Niinomi, M. Topuz, S.G. Koç, H. Yilmazer, M. Nakai, In-vitro corrosion responses of bioactive hybrid coatings, in: 2nd Int. Conf. Mater. Sci. Technol. Cappadocia (IMSTEC 2017), 11-13 October, Nevsehir, TURKEY, 2017: pp. 379–379.

M. Taspinar, M. Topuz, S.G. Koç, B. Dikici, V. Yüksek, M. Niinomi, M. Nakai, Sol-gel bioactive coatings on β-type titanium alloys for improvement of biocompatibility: cell culture response, in: 2nd Int. Conf. Mater. Sci. Technol. Cappadocia (IMSTEC 2017), 11-13 October, Nevsehir, TURKEY, 2017: pp. 380–380.

M. Topuz, B. Dikici, S.G. (Koc), M. Niinomi, M. Nakai, Structural characterization and in-vitro corrosion response of HA/TiO2 composite coatings on Ti-6Al-4V, in: 20th Int. Corros. Congr. Process Saf. Congr. 2017 (EUROCORR 2017), 3-7 September, Prague, CZECH REPUBLIC, 2017: pp. 1–10.

B. Dikici, H. Yilmazer, Corrosion‐resistant high entropy stainless steels — a perspective, in: 3rd Iron Steel Symp., 03-05 April, Karabuk, TURKEY, 2017: p. 14.

R. Tuntas, B. Dikici, M. Gavgali, Prediction of corrosion behaviour of particulate reinforced metal matrix composites by adaptive neuro-fuzzy inference system (ANFIS), in: XIV. Int. Corros. Symp., 05-07 October, Bayburt, TURKEY, 2016: pp. 521–525.

S. Sonmez, B. Dikici, O.M. Lutfi, Microstructural characterizations of sintered W-VC-C composites and their electrochemical behaviours in aqueous 1 M H2SO4 solutions, in: XIV. Int. Corros. Symp., 05-07 October, Bayburt, TURKEY, 2016: pp. 427–433.

B. Dikici, I. Ozdemir, M. Topuz, Cold spray deposition of SS316L powders on Al5052 substrates and their potential using for biomedical applications, in: 18th Int. Conf. Mater. Sci. Eng. Manuf. (ICMSEM 2016), 25-26 April, Paris, FRANCE, 2016: pp. 2085–2089.

E. Erhan, B. Dikici, Yeni yapılacak demiryolu hatlarında mekanik titreşimlerin oluşturabileceği problemler ve alınabilecek önlemler, in: 3rd Int. Symp. Railw. Syst. Eng., 13-15 October, Karabuk, TURKEY, 2016: pp. 520–530. http://sciencepolicy.ca/sites/default/files/1216-CSPC-PostEvent-v8.pdf.

B. Dikici, M. Topuz, S.G. (Koc), H. Yilmazer, M. Niinomi, Synthesis and characterization of sol-gel hydroxyapatite coatings on the beta type titanium alloys: the effect of sintering conditions, in: 3rd Int. Conf. Adv. Technol. Sci., 01-03 September, Konya, TURKEY, 2016: pp. 295–295.

A.A. Ela, B. Dikici, Demiryollarında iş sağlığı ve güvenliği problemleri ve çözüm önerileri, in: 3rd Int. Symp. Railw. Syst. Eng., 13-15 October, Karabuk, TURKEY, 2016: pp. 531–536. http://sciencepolicy.ca/sites/default/files/1216-CSPC-PostEvent-v8.pdf.

M. Topuz, S.G. Koç, H. Yilmazer, M. Niinomi, M. Nakai, Zirkonya takviyeli hidroksiapatit (HA) bazlı biyoaktif hibrid kaplamaların korozyon duyarlılıkları, in: XIV. Uluslararası Koroz. Sempozyumu, 5-7 October, Bayburt, TURKEY, 2016: pp. 1–10.

M. Topuz, B. Dikici, S.G. (Koc), Some studies on hydroxyapatite based bioactive hybrid coatings reinforced with metal oxides, in: Int. Conf. Mater. Sci. Technol. Cappadocia, 06-08 April, Nevsehir, TURKEY, 2016: pp. 511–516.

S. Sönmez, B. Dikici, M.L. Öveçoǧlu, Characterization and corrosion properties of W based composites reinforced with VC-TiC, in: Int. Congr. Nat. Eng. Sci., 01-05 September, Skopje, MACEDONIA, 2016: p. 62. http://ir.obihiro.ac.jp/dspace/handle/10322/3933.

S.G. Koç, B. Dikici, M. Topuz, H. Yilmazer, I. Ozdemir, M. Niinomi, M. Nakai, Preperation and characterization of chitosan/hydroxyapatite sol-gel coating on Ti-6Al-4V, in: 6th Int. Conf. Adv. Mater. Syst. (ICAMS 2016), 20-22 October, Bucharest, ROMANIA, 2016: pp. 263–267.

H. Yilmazer, B. Dikici, M. Niinomi, M. Nakai, H.H. Lui, Y. Todaka, A.N. Ozcivan, Electrochemical behaviors of biomedical nano-grained β-type titanium alloys, in: Int. Conf. Process. Manuf. Adv. Mater., 29 May-03 June, Graz, AUSTRIA, 2016: p. 625. doi:10.4028/www.scientific.net/MSF.879.2549.

R. Tuntas, B. Dikici, Prediction of hardness values of cold worked Al/SiCp composite at different reduction ratio by adaptive neuro-fuzzy interface system, in: 2nd Int. Conf. Anal. Its Appl., 12-15 July, Kirsehir, TURKEY, 2016: p. 253.

B. Dikici, H. Yilmazer, I. Ozdemir, The effect of post heat treatment on microstructure of 316L cold sprayed coatings and its microstructureal response, in: 29th Int. Conf. Surf. Modif. Technol., 9-12 June Copenhagen, DANMARK, 2015: pp. 1–11.

F. Kalaycı, B. Dikici, AZ serisi magnezyum alaĢımı levhalar: korozyon davranışı üzerine homojenleştirme ısıl işlemin etkisi, in: Int. Multidiscip. Congr. Eurasia, 1-5 September, Scopje, MAKEDONYA, 2015: pp. 59–78.

B. Dikici, F. Bedir, M. Gavgali, Production, characterization, and mechanical behavior of Al based metal matrix composites incorporating TiC particles, in: 17th Int. Conf. Strength Mater., 09-14 August, Brno, CZECH REPUBLIC, 2015: p. 397.

K. Cho, M. Niinomi, M. Nakai, H. Yilmazer, Y. Todaka, B. Dikici, M. Sen, M. Shiku, T. Matsue, Nanostructured β-Type Titanium Alloys: Mechanical And Biological Biocompatibility, in: Annu. Conf. Japan Soc. Biomater., 17-18 November, Tokyo, JAPAN, 2015: p. 182.

R. Tuntas, B. Dikici, Prediction of corrosion susceptibilities of Al based metal matrix composites reinforced with SiC particles using artificial neural network, in: Int. Conf. Comput. Exp. Sci. Eng., 25-29 October, Antalya, turkey, 2014: p. 1.

B. Dikici, M. Gavgali, What are the harmful effects of corrosion?, in: Int. Environ. Sci. Symp. Van, 4-7 June, Van, TURKEY, 2014: p. 1. https://www.epa.gov/so2-pollution/sulfur-dioxide-basics#effects.

 新家光雄, 仲井正昭, H. Yilmazer, M. Şen, 仁珠玖, 智末永, B. Dikici, 義一戸高, 高圧ねじり加工を用いたナノ組織化によるβ型チタン合金の高生物学的生体適合性化, in: 136th Annu. Meet. Japan Soc. Biomater., 17-18 November, Tokyo, JAPAN, 2014: pp. 6–7.

H. Yilmazer, M. Niinomi, K. Cho, M. Nakai, Y. Todaka, B. Dikici, M. Sen, H. Shiku, T. Matsue, Nanostructured β-type titanium alloys: mechanical and biological biocompatibility, in: Conf. Innov. Mater. Struct. Technol. Metall. Eng. (METECH ’14), 17-19 November, Istanbul, TURKEY, 2014: pp. 83–96.

B. Dikici, M. Gavgali, The effect of sintering time on the corrosion behavior of in-situ Al-Cu/Al2O3 nanocomposites, in: 10th Nanosci. Nanotechnol. Conf., 17-21 June, Istanbul, TURKEY, 2014: p. 444.

B. Dikici, M. Gavgali, F. Bedir, K. Tulin, In-situ Al/TiC nanocomposites: the effect of sintering temperature on the corrosion behavior, in: Eur. Corros. Congr. (EUROCORR, 8-12 September, Pisa, ITALY, 2014: p. 658.

H. Yilmazer, M. Niinomi, K. Cho, M. Nakai, J. Hieda, B. Dikici, Y. Todaka, Effects of high-pressure torsion on corrosion behaviors of β-type titanium alloy in simulated body fluid, in: 21th Mater. Process. Tech. Conf., 08-10 November, Tokyo, JAPAN, 2013: pp. 1–5.

B. Dikici, H. Yilmazer, M. Niinomi, K. Cho, M. Nakai, J. Hieda, I. Ozdemir, Effect of aging treatment on corrosion susceptibilities of biomedical nanostructured β-type titanium alloys through severe plastic deformation, in: 9th Nanosci. Nanotechnol. Conf., 24-28 June, Erzurum, TURKEY, 2013.

Z. Esen, B. Dikici, O. Duygulu, Investigation of Ti-based composites and porous materials designed for biomedical applications, in: THERMEC’2013 (International Conf. Process. Manuf. Adv. Mater. (Processing, Fabr. Prop. Appl., 2-6 December, Las Vegas, USA, 2013: p. 1.

B. Dikici, M. Gavgali, K. Tulin, The effect of sintering temperature on the corrosion behavior of aluminium based metal matrix composites reinforced with in-situ TiC nanoparticles, in: 9th Nanosci. Nanotechnol. Conf., 24-28 June, Erzurum, TURKEY, 2013: p. 182.

B. Dikici, M. Gavgali, F. Bedir, Production of in-situ Al–Cu/α-Al2O3 metal matrix composites by means of conventional hot pressing and the effect of sintering temperature, in: Euro Intell. Mater., 25-27 September, Kiel, GERMANY, 2013: p. 75.

B. Dikici, H. Yilmazer, M. Niinomi, M. Nakai, I. Ozdemir, M. Gavgali, Effect of high-pressure torsion (HPT) processing on corrosion behavior af a new biomedical β-type titanium alloy, in: Corrosion-2012, 4-6 June Lviv, UKRAINE, 2012: pp. 95–100.

B. Dikici, F. Bedir, M. Gavgali, Corrosion susceptibilities of under and over aged Al/TiC tree-layered compositesp produced by hot-pressing, in: 5th Powder Metall. Symp. Exhib., 09-10 August, Kuala Lumpur, MALAYSIA, 2011: pp. 202–208.

S. Sönmez, B. Aksakal, B. Dikici, M. Gavgali, Biyoseramik kaplamanın AA6061-T4 alaşımında korozyon direncine etkisi, in: 6th Int. Adv. Technol. Symp., 16-18 May, Elazig, TURKEY, 2011: pp. 415–421.

F. Kalaycı, B. Dikici, O. Duygulu, M. Gavgali, Determination of corrosion behaviors of AZXX zeries magnesium alloy sheets manufactured by two-roll strip casting method, in: B. Gozen, Y. Aysel, H. Evrim, P. Arzu, D. Berrin (Eds.), XII. Int. Corros. Symp., 06-09 October, Eskisehir, TURKEY, 2010: pp. 297–303. http://www.korozyondernegi.org.tr/tr/html/156/Sempozyum+Bildirileri/.

B. Dikici, F. Bedir, M. Gavgali, Effect of reinforcement content on corrosion behaviors of Al-Cu/TiCp MMCs fabricated by hot pressıng, in: 4th Malaysian Powder Metall. Malaysian Metall. Conf. 2010, 23-24 Novamber, Penang, MALAYSIA, 2010: pp. 15–16.

B. Dikici, F. Kalaycı, T. Omer, Makine teknik eğitiminde temel sorunlar ve çözüm önerileri, in: 1st Ilternational 5th Natl. Vocat. Sch. Symp., 27-29 May, Konya, TURKEY, 2009: pp. 327–336.

B. Dikici, F. Bedir, M. Gavgali, Al/TiC in-situ nano kompozitlerin sıcak presleme yöntemiyle üretilmesi, in: 5th Int. Adv. Technol. Symp., 13-15 May, Karabuk, TURKEY, 2009: pp. 1026–1030.

M. Harun, O. Metin, B. Dikici, M. Gavgali, In situ sıcak pres yöntemi ile üretilen alüminyum esaslı kompozitin korozyon ve mekanik özelliklerinin karşılaştırılması, in: 5th Int. Adv. Technol. Symp., 13-15 May, Karabuk, TURKEY, 2009: pp. 953–956.

K. Tulin, B. Dikici, M. Gavgali, Çelik yüzeylerdeki boya altı korozyonuna karşı çevre dostu iletken polipirol kaplamalar, in: Black Sea Int. Environ. Symp., 25-29 August, Giresun, TURKEY, 2008: pp. 562–574. http://www.jieas.com/bies08/.

O. Serkan, B. Dikici, S. Ilyas, M. Gavgali, PTA yöntemi ile paslanmaz çelik yüzeyine alaşımlandırılan NiTi toz karışımının korozyon karakteristiği, in: C. Ahmet, M. Ugur, A.A. Ziylan, O. Bulent (Eds.), XI. Int. Corros. Symp., 22-25 October, Izmir, TURKEY, 2008: pp. 665–671.

K. Tulin, B. Dikici, S. Canan, M. Gavgali, F. Bedir, O. Duygulu, Sıcak pres yöntemiyle üretilmiş in-situ Al/TiC nano kompozitin korozyon davranışı, in: C. Ahmet, M. Ugur, A.A. Ziylan, O. Bulent (Eds.), XI. Int. Corros. Symp., Turkey Corrosion Association, 22-25 October, Izmir, TURKEY, 2008: pp. 672–679.

B. Dikici, C. Tekmen, M. Gavgali, Y. Tsunekawa, M. Okumiya, Corrosion behavior of in-situ Al2O3 formed composite coating by DC plasma spraying, in: Int. Therm. Spray Conf. Expo., 02-04 June, Maastricht, NETHERDLANDS, 2008: pp. 1480–1484. https://www.dvs-ev.de/call4papers/index.cfm?vid=19.

B. Dikici, C. Tekmen, M. Gavgali, The effect of T8 treatment on corrosion behavior of Al-SiCp MMCs, in: 16th Int. Conf. Compos. Mater., 8-13 July, Kyoto, JAPAN, 2007: pp. 3–4.

B. Dikici, C. Tekmen, M. Gavgali, The effect of cold-worked ratio on corrosion behavior of T8 tempered Al-Si-Mg/SiCp metal matrix composites, in: X. Int. Corros. Symp., 1-4 November, Adana, TURKEY, 2006: pp. 321–329. http://www.korozyondernegi.org.tr/upload/mce/bildiriler/korsem/korsem_10_2006adana.pdf.

M. Gavgali, B. Dikici, F. Bedir, The influence of boron carbide (B4C) reinforcement on the pitting behaviour of aluminium, in: X. Int. Corros. Symp., 1-4 November, Adana, TURKEY, 2006: pp. 207–214. http://www.korozyondernegi.org.tr/upload/mce/bildiriler/korsem/korsem_10_2006adana.pdf.

M. Gavgali, B. Dikici, Konvansiyonel sıcak presleme yöntemi ile üretilmiş Al-TiC kompozitlerin elektrokimyasal davranışları, in: 11th Int. Mater. Symp. (MATERIALS 2006), 19-21 April Denizli, TURKIYE, 2006: pp. 527–531.

M. Gavgal, B. Dikici, C. Tekmen, SiC partikül takviyeli Al metal matrisli kompozitlerin korozyon davranışları, in: IX. Int. Corros. Symp., 22-25 September, Ankara, TURKIYE, 2004: pp. 409–420.

Domestic conferences

B. Dikici, M. Topuz, S.G. (Koc), H. Yilmazer, M. Niinomi, M. Nakai, Beta (β)-tipi titanyum alaşımlarının elektrokimyasal korozyon davranışı üzerine hidroksiapatit esaslı biyoaktif kaplamaların etkisi, in: 12. Ulus. Kim. Mühendisliği Kongresi, 23-26 Agustos, Izmir, TURKIYE, 2016: pp. 2–7.

E. Zubaroğlu, B. Dikici, Ö. Duygulu, M. Gavgali, AM50 ve AM60 magnezyum alaşımı levhaların korozyon davranışı üzerine homojenleştirme işleminin etkisi, in: VI. Makina Tasarım ve İmalat Teknol. Kongresi (MATİT 2011), 22-23 Ekim, Konya, TURKIYE, 2011: pp. 1–12.

B. Dikici, M. Gavgalı, T. Kıyak, F. Bedir, F. Kalaycı, Sıcak presleme yöntemi ile üretilmiş Al‒Cu/Al2O3 in‒situ kompozitler: sinterleme süresinin etkisi, in: V. Makina Tasarım ve İmalat Teknol. Kongresi (MATİT 2009), TMMOB Makina Mühendisleri Odası, 17-18 Ekim, Konya, TURKIYE, 2009: pp. 57–66.

K.C. Baki, B. Dikici, T. Kıyak, K. Aysel, Çelik yüzeylerdeki pirol katkılı epoksi boyaların korozyona karşı koruma refleksinin tahribatsız ve tahribatlı elektrokimyasal testlerle belirlenmesi, in: 11. Otomotiv Sempozyumu, TMMOB Makina Mühendisleri Odası, 08–09 Mayıs, Bursa, TURKIYE, 2009: pp. 308–316.

B. Dikici, M. Gavgal, F. Bedir, Al-Cu/Al2O3 in-situ kompozitler: sinterleme sıcaklığının etkisi, in: 11. Otomotiv Sempozyumu, TMMOB Makina Mühendisleri Odası, 08–09 Mayis, Bursa, TURKIYE, 2009: pp. 14–22.

M. Gavgalı, Y. Totik, H. Altun, B. Dikici, Nikel kaplanmış farklı malzemelerin korozyon davranışlarının karşılaştırılması, in: IV. Demir–Çelik Kongresi, 01-03 Kasim, Karabuk, TURKIYE, 2007: pp. 219–224.

B. Dikici, F. Bedir, M. Gavgalı, G. Adem, Yüksek oranlarda SiC partikül takviyeli Al─Cu alaşımlı kompozitlerin elektrokimyasal davranışları, in: X. Otomotiv ve Yan Sanayi Sempozyumu, TMMOB Makina Mühendisleri Odası, 25-26 Mayis, Bursa, TURKIYE, 2007: pp. 186–191.

B. Dikici, F. Bedir, H. Altun, M. Gavgalı, %40 TiC ve SiC partikül katkılı metal matrisli kompozitlerin potansiyodinamik ve EIS analizleri, in: IV. Makina Tasarım ve İmalat Teknol. Kongresi, TMMOB Makina Mühendisleri Odası, 24–25 Kasim, Konya, TURKIYE, 2007: pp. 135–142.

M. Gavgalı, B. Dikici, F. Bedir, Al-5Cu/50 TiC metal matrisli kompozitin korozyon duyarlılığı, in: GAP V. Mühendislik Kongresi, 26-28 Nisan, Sanliurfa, TURKIYE, 2006: pp. 148–154.

Ç. Aynur, B. Dikici, M. Gavgalı, E. Mehmet, Toz altı kaynağıyla birleştirilen yer altı taşıma borularının kaynak bölgesinin korozyonu, in: III. Makine Tasarım ve İmalat Teknol. Kongresi, TMMOB Makina Mühendisleri Odası, 16-17 Eylul, Konya, TURKIYE, 2005: pp. 277–286.

B. Dikici, M. Balcı, M. Gavgalı, G. Ömer, İş maki̇nalarinda gürültü problemi̇, çevreye etki̇si̇ ve kontrolü, in: II. İş Makinaları Sempozyumu ve Sergisi, TMMOB Makina Mühendisleri Odası, 29-30 Eylul/1 Ekim, Istanbul, TURKIYE, 2005: pp. 389–400.

B. Dikici, M. Gavgalı, C. Tekmen, Ç. Aynur, Al/SiCp kompozitlerde görülen porozite tipleri ve geçirdikleri korozyon mekanizmaları, in: III. Makine Tasarım ve İmalat Teknol. Kongresi, TMMOB Makina Mühendisleri Odası, 16-17 Eylul, Konya, TURKIYE, 2005: pp. 258–267.

M. Gavgalı, B. Dikici, A. Yılmaz, Çevreni̇n iş maki̇nalarının yürüyüş takımları üzeri̇ndeki̇ korozyon etki̇si̇ne genel bi̇r bakış, in: İş Makinaları Sempozyumu ve Sergisi, TMMOB Makina Mühendisleri Odası, 06-07 Eylul, Istanbul, TURKIYE, 2003: pp. 47–56.