Journal papers (peer reviewed, SCI, SCI-Expanded)

A. Berrissoul, A. Ouarhach, F. Benhiba, A. Romane, A. Zarrouk, A. Guenbour, B. Dikici, A. Dafali, Evaluation of Lavandula mairei extract as green inhibitor for mild steel corrosion in 1 M HCl solution. Experimental and theoretical approach, J. Mol. Liq. 703 (2020) 113493. doi:10.1016/j.molliq.2020.113493.

B. Dikici, F. Bedir, M. Gavgali, The effect of high TiC particle content on the tensile cracking and corrosion behavior of Al–5Cu matrix composites, J. Compos. Mater. 54 (2020) 1681–1690. doi:10.1177/0021998319884098.

O. Yigit, B. Dikici, T.C. Senocak, N. Ozdemir, One-step synthesis of nano-hydroxyapatite/graphene nanosheet hybrid coatings on Ti6Al4V alloys by hydrothermal method and their in-vitro corrosion responses, Surf. Coatings Technol. 394 (2020) 125858. doi:10.1016/j.surfcoat.2020.125858.

B. Tozkoparan, B. Dikici, M. Topuz, F. Bedir, M. Gavgali, Al-5Cu/B4Cp composites: The combined effect of artificially aging (T6) and particle volume fractions on the corrosion behaviour, Adv. Powder Technol. c (2020) 2–11. doi:10.1016/j.apt.2020.05.006.

D. Hernández-Escobar, S. Champagne, H. Yilmazer, B. Dikici, C.J. Boehlert, H. Hermawan, Current status and perspectives of zinc-based absorbable alloys for biomedical applications, Acta Biomater. 97 (2019) 1–22. doi:10.1016/j.actbio.2019.07.034.

M.F. Sarac, B. Dikici, Effect of heat treatment on wear and corrosion behavior of high chromium white cast iron, Mater. Test. 61 (2019) 659–666. doi:10.3139/120.111382.

F. Songur, B. Dikici, M. Niinomi, E. Arslan, The plasma electrolytic oxidation (PEO) coatings to enhance in-vitro corrosion resistance of Ti–29Nb–13Ta–4.6Zr alloys: The combined effect of duty cycle and the deposition frequency, Surf. Coatings Technol. 374 (2019) 345–354. doi:10.1016/j.surfcoat.2019.06.025.

B. Dikici, M. Niinomi, M. Topuz, S.G. Koc, M. Nakai, Synthesis of biphasic calcium phosphate (BCP) coatings on β‒type titanium alloys reinforced with rutile-TiO2 compounds: adhesion resistance and in-vitro corrosion, J. Sol-Gel Sci. Technol. 87 (2018) 713–724. doi:10.1007/s10971-018-4755-2.

B. Dikici, M. Topuz, Production of Annealed Cold-Sprayed 316L Stainless Steel Coatings for Biomedical Applications and Their in-vitro Corrosion Response, Prot. Met. Phys. Chem. Surfaces. 54 (2018) 333–339. doi:10.1134/S2070205118020168.

B. Dikici, M. Niinomi, M. Topuz, Y. Say, B. Aksakal, H. Yilmazer, M. Nakai, Synthesis and characterization of hydroxyapatite/TiO2 coatings on the β-type titanium alloys with different sintering parameters using sol-gel method, Prot. Met. Phys. Chem. Surfaces. 54 (2018) 457–462. doi:10.1134/S2070205118030255.

R. Tuntas, B. Dikici, An ANFIS model to prediction of corrosion resistance of coated implant materials, Neural Comput. Appl. 28 (2017) 3617–3627. doi:10.1007/s00521-017-3103-8.

B. Dikici, H. Yilmazer, I. Ozdemir, M. Isik, The Effect of post-heat treatment on microstructure of 316L cold-sprayed coatings and their corrosion performance, J. Therm. Spray Technol. 25 (2016) 704–714. doi:10.1007/s11666-016-0402-z.

Y. Say, B. Aksakal, B. Dikici, Effect of hydroxyapatite/SiO2 hybride coatings on surface morphology and corrosion resistance of REX-734 alloy, Ceram. Int. 42 (2016) 10151–10158. doi:10.1016/j.ceramint.2016.03.127.

B. Dikici, C. Tekmen, A comparative study: The combined effect of the cold working and age hardening processes on pitting behaviour of Al/SiC metal matrix composites under saline environment, J. Compos. Mater. 50 (2016) 471–480. doi:10.1177/0021998315576554.

R. Tuntas, B. Dikici, An investigation on the aging responses and corrosion behaviour of A356/SiC composites by neural network: The effect of cold working ratio, J. Compos. Mater. 50 (2016) 2323–2335. doi:10.1177/0021998315602950.

B. Dikici, C. Tekmen, O. Yigit, Corrosion performance and microstructural response of A380 matrix alloy reinforced with sol–gel TiO 2 -coated SiC particles: a perspective on previous studies, Int. J. Mater. Res. 106 (2015) 275–281. doi:10.3139/146.111180.

R. Tuntas, B. Dikici, Prediction of corrosion susceptibilities of Al-based metal matrix composites reinforced with SiC particles using artificial neural network, J. Compos. Mater. 49 (2015) 3431–3438. doi:10.1177/0021998314565430.

S. Sonmez, B. Aksakal, B. Dikici, Influence of hydroxyapatite coating thickness and powder particle size on corrosion performance of MA8M magnesium alloy, J. Alloys Compd. 596 (2014) 125–131. doi:10.1016/j.jallcom.2014.01.175.

B. Dikici, M. Gavgali, The effect of sintering time on synthesis of in situ submicron α-Al2O3 particles by the exothermic reactions of CuO particles in molten pure Al, J. Alloys Compd. 551 (2013) 101–107. doi:10.1016/j.jallcom.2012.10.018.

Z. Esen, B. Dikici, O. Duygulu, A.F. Dericioglu, Titanium–magnesium based composites: Mechanical properties and in-vitro corrosion response in Ringer’s solution, Mater. Sci. Eng. A. 573 (2013) 119–126. doi:10.1016/j.msea.2013.02.040.

S. Sonmez, B. Aksakal, B. Dikici, Corrosion protection of AA6061-T4 alloy by sol–gel derived micro and nano-scale hydroxyapatite (HA) coating, J. Sol-Gel Sci. Technol. 63 (2012) 510–518. doi:10.1007/s10971-012-2813-8.

B. Dikici, S. Ozel, M. Gavgali, I. Somunkiran, The effect of arc current on the corrosion behaviour of coated NiTi alloy on AISI304 by plasma transferred arc process, Prot. Met. Phys. Chem. Surfaces. 48 (2012) 563–567. doi:10.1134/S2070205112050024.

B. Dikici, Age hardening response of an Al/TiC hot pressed multi-layered composite: Influence on corrosion, J. Compos. Mater. 46 (2012) 471–481. doi:10.1177/0021998311418548.

B. Dikici, I. Ozdemir, FeB and FeB/h‐BN based anti‐corrosive composite coatings for aluminium alloys, Anti-Corrosion Methods Mater. 59 (2012) 246–254. doi:10.1108/00035591211265659.

B. Dikici, C. Tekmen, M. Gavgali, U. Cocen, The effect of electroless Ni coating of SiC particles on the corrosion behavior of A356 based squeeze cast composite, Strojniški Vestn. – J. Mech. Eng. 57 (2011) 11–20. doi:10.5545/sv-jme.2010.111.

B. Dikici, M. Gavgali, F. Bedir, Synthesis of in situ TiC nanoparticles in liquid aluminum: the effect of sintering temperature, J. Compos. Mater. 45 (2011) 895–900. doi:10.1177/0021998310377939.

B. Aksakal, M. Gavgali, B. Dikici, The effect of coating thickness on corrosion resistance of hydroxyapatite coated Ti6Al4V and 316L SS implants, J. Mater. Eng. Perform. 19 (2010) 894–899. doi:10.1007/s11665-009-9559-7.

B. Dikici, C. Tekmen, O. Yigit, M. Gavgali, U. Cocen, Detrimental effect of particle sol–gel coating on the corrosion behavior of A380–SiC composite, Corros. Sci. 51 (2009) 469–476. doi:10.1016/j.corsci.2008.12.023.

B. Dikici, F. Bedir, M. Gavgali, T. Kiyak, Corrosion characteristics of Al-Cu/B4C (T6) MMCs and their microstructure evaluation, Kov. Mater. 47 (2009) 317–323. http://www.scopus.com/inward/record.url?eid=2-s2.0-74349092297&partnerID=tZOtx3y1.

H. Mindivan, C. Tekmen, B. Dikici, Y. Tsunekawa, M. Gavgali, Wear behavior of plasma sprayed composite coatings with in situ formed Al2O3, Mater. Des. 30 (2009) 4516–4520. doi:10.1016/j.matdes.2009.05.018.

M. Gavgali, B. Dikici, F. Bedir, Corrosion susceptibilities of Al-Cu / TiC MMCs fabricated by conventional hot pressing, Indian Jounal Eng. Mater. Sci. 14 (2007) 303–308. http://nopr.niscair.res.in/handle/123456789/202.

M. Gavgali, B. Dikici, C. Tekmen, The effect of SiCp reinforcement on the corrosion behaviour of Al based metal matrix composites, Corros. Rev. 24 (2006). doi:10.1515/CORRREV.2006.24.1-2.27.

B. Dikici, M. Gavgali, C. Tekmen, Corrosion behavior of an artificially aged (T6) Al–Si–Mg-based metal matrix composite, J. Compos. Mater. 40 (2006) 1259–1269. doi:10.1177/0021998305057434.

Book chapters

H. Yilmazer, M. Niinomi, K. Cho, M. Nakai, H. Lui, Y. Todaka, B. Dikici, M. Şen, H. Shiku, T. Matsue, Mechanical and surface functionalities of nanostructured β-type titanium alloys through severe plastic deformation, in: Vasisht Venkatesh, A.L. Pilchak, J.E. Allison, S. Ankem, R. Boyer, J. Christodoulou, H.L. Fraser, M.A. Imam, Y. Kosaka, H.J. Rack, A. Chatterjee, A. Woodfield (Eds.), Proc. 13th World Conf. Titan., John Wiley & Sons, Inc., 2016: pp. 1761–1766. doi:10.1002/9781119296126.ch296.

B. Dikici, Z. Esen, O. Duygulu, S.G. (Koc), Corrosion of metallic biomaterials, in: M. Niinomi, T. Narushima, M. Nakai (Eds.), Adv. Met. Biomater. Tissues, Mater. Biol. React., Springer-Verlag Berlin Heidelberg, Berlin, Heidelberg, 2015: pp. 275–303. doi:10.1007/978-3-662-46836-4.

Journal papers – in English

M. Topuz, B. Dikici, Two simple methods for surface modification of lithium disilicate dental blocks with hydroxyapatite, Res. Eng. Struct. Mater. 6 (2020) 97–104. doi:10.17515/resm2019.132me0506tn.

M. Topuz, B. Dikici, M. Gavgali, H. Yilmazer, A review on the hydrogels used in 3D bio-printing, Int. J. 3D Print. Technol. Digit. Ind. 2 (2018) 68–75. https://www.researchgate.net/publication/326672800.

S. Sönmez, B. Burak Dikici, M.L. Öveçoğlu, Microstructural characterizations of sintered W-VC-C composites and their electrochemical behaviours in 1 M H2SO4 aqueous solutions, Technol. Appl. Sci. 12 (2017) 9–15. doi:10.12739/NWSA.2017.12.1.2A0107.

R. Tuntas, B. Dikici, M. Gavgali, Prediction of corrosion behaviour of particulate reinforced metal matrix composites by adaptive neuro-fuzzy inference system (ANFIS), Corrosion. 22 (2016) 43–46.

H. Yilmazer, B. Dikici, M. Niinomi, M. Nakai, H.H. Lui, Y. Todaka, A.N. Ozcivan, Electrochemical behaviors of biomedical nanograined β-type titanium alloys, Mater. Sci. Forum. 879 (2016) 2549–2554. doi:10.4028/www.scientific.net/MSF.879.2549.

B. Dikici, I. Ozdemir, M. Topuz, Cold spray deposition of SS316L powders on Al5052 substrates and their potential using for biomedical applications, Int. J. Chem. Mol. Nucl. Mater. Metall. Eng. 10 (2016) 451–455. doi:10.5281/zenodo.1124335.

H. Yilmazer, M. Niinomi, K. Cho, M. Nakai, H.-H. Liu, Y. Todaka, B. Dikici, M. Sen, H. Shiku, T. Matsue, Osteoblast attachment on nanostructured β-type titanium alloys subjected to severe plastic deformation, J. Japanese Soc. Dent. Mater. Devices. 34 (2015) 123. http://ci.nii.ac.jp/naid/110009923915/en/.

B. Dikici, Electrochemical biocompatibilities of beta-type Ti-Nb-Ta-Zr alloys through microstructural refinement, IMR KINKEN Res. Highlights. 95 (2015) 48.

B. Dikici, T. Kiyak, C. Tekmen, M. Gavgali, SEM observations on the porosity activities during corrosion of Al-Si-Mg/SiCp metal matrix composites, Mater. Sci. An Indian J. 3 (2007) 8–12. https://www.tsijournals.com/articles/sem-observations-on-the-porosity-activities-during-corrosion-of-al-simgsicp-metal-matrix-composites.pdf.

Journal papers – in Turkish

A.M. Yılmaz, F. SONGUR, E. Arslan, B. DİKİCİ, PEO Kaplamalara CeO2 Nanopartikül İlavesinin Korozyon Davranışına Etkisi, J. Polytech. 0900 (2020) 0–2. doi:10.2339/politeknik.665497.

F. Kelen, T. Aydoğmuş, M. Gavgali, B. Dİkİcİ, Toz metalürjisi yöntemi ile üretilmiş magnezyum matrisli kompozitlerin korozyon duyarlılıkları, BEU J. Sci. 8 (2019) 914–920.

M. Topuz, B. Dikici, S.G. (Koc), H. Yilmazer, M. Niinomi, M. Nakai, Zirkonya takviyeli hidroksiapatit (HA) bazlı biyoaktif hibrid kaplamaların korozyon duyarlılıkları, Eng. Sci. 12 (2017) 66–77. doi:10.12739/NWSA.2017.12.1.1A0374.

B. Dikici, AR-GE ve inovasyon çerçevesinde doğu anadolu bölgesi’ne hızlı bir bakış, Metalik. (2015) 38–39.

B. Dikici, F. Bedir, H. Altun, M. Gavgalı, % 40 TiC ve SiC partikül katkılı metal matrisli kompozitlerin potansiyodinamik ve EIS analizleri, Mühendis ve Makina (Engineer Mach. Mag. 50 (2009) 18–24. http://www.mmo.org.tr/resimler/dosya_ekler/4f6f615ab4b1191_ek.pdf?dergi=768.

B. Dikici, M. Balcı, M. Gavgalı, Ö. Giündoğdu, İş makinalarında gürültü kontrolü, İnşaat Dünyası. 2 (2006) 94–100.